Seat Stabilizer Under Seat | Fritz Hansen | Arne Jacobsen | Set of 3 or 4

Description Seat Stabilizer Under Seat Fritz Hansen Arne Jacobsen suitable for Ant chair Ant chair 3101, Grand Prix with metal base 3130, Seagull 3108 Munkegaardsstolen 3105 3103, 3107, 3207 DOT stool (select “early version”) Select a set: early version: solid Rubber (for vintage chairs, limited stock) late version: Plastic (a little darker than in the picture) The base tubes of Fritz Hansen chairs are always 14mm diameter for all production years, except when they are plastic coated. If you have a larger diameter they are not Fritz Hansen! 1 Set is 3 or 4 pieces, like selected Seat Stabilizer Under Seat | Fritz Hansen | Arne Jacobsen | Set of 3 or 4 Color: Light-grey Assembling instruction The stabilizers must be very firmly attached to the pipe, they are not glued. Thats why the stabilizer while assembling is often a bit difficult to move onto the leg. To facilitate the installation, we recommend some dish washer fluid as a sliding aid! Coat the complete leg with some dish washer fluid, slide the stabilizer on and then wipe down the rest. When the dish washer fluid dried under the stabilizer it will be attached to the pipe. If you have plastic covered legs, you need to put the stabilizer into hot water for a moment! For DOT stool select “early version”, it need to be glued under the seat shell. Use 2-compound glue or super-glue, remove old glue, degrease all parts with Acetone (NOT nail polish remover!). Do not use alcohol, thinner or similar! Professional gluing is degreased with acetone! Please also read: Hints on 2 components adhesive Keywords: Fritz Hansen, Gummis, Sitzgummis, Stuhlgummis, Rubber for dot stool